The Tipster: Getting Started with the Element Method

The Element Method in 12d Model provides a more flexible and efficient approach to super alignment design compared to the traditional IP Method. Rather than relying on manually positioned Intersection Points (IPs) to define straight and curved sections of a road, the Element Method uses geometric features such as points, directions, radii and lengths. These elements communicate with one another along the super alignment, allowing design changes to be made more efficiently, with fewer manual calculations and a reduced risk of errors. Although it involves a more detailed setup, the added flexibility, speed and accuracy make it a valuable approach for designing and modifying complex alignments.

There are three main types of element parts used in the Element Method: fixed, floating and free. Fixed elements, such as fixed lines and fixed arcs, can independently define geometry using specified inputs. Floating elements, including floating lines and arcs, require an adjoining element to complete their geometry, while free elements, such as free lines and free arcs, rely on elements at both ends to automatically determine their geometry. For common alignment designs, fixed lines are typically used for straight sections, while free arcs are used for horizontal curves and free parabolas for vertical curves. Understanding how these elements interact helps determine which parts to use and where to position them when creating a super alignment.

To begin creating a super alignment in 12d Model, navigate to Strings > Super Alignments > Create Super Alignment and configure the general node, labels and required settings. Once created, open the Part Editor to start defining the horizontal geometry. Insert a Fixed Line using the Point and Direction option, then specify its starting position and bearing. Set the relative start and end values to establish the initial length of the alignment. Next, insert another Fixed Line using the Two Points option to define the following straight section. The starting point can be positioned along the centre of the road reserve using SnapScad’s midpoint command, while the endpoint can be located at the centre of the cul-de-sac using the appropriate centre and circle commands. Once the second fixed line is set, 12d Model automatically calculates the intersection between the two lines without requiring the IP position to be manually defined. To complete the horizontal curve, insert a Free Arc and specify its radius. It is important to enter the correct radius sign to ensure the curve runs in the intended direction. Finally, insert a Floating Line using the From End option and specify a length of 10 metres to extend the super alignment to the required location.

Once the horizontal geometry is complete, profile the super alignment to display it in the Section View and begin defining the vertical geometry. Add the design strings from the intersecting road, RS2B01, to establish the reference points for the vertical design. Start by inserting a Fixed Line using the Two Points option to connect the crown of the road to the lip of kerb, maintaining the existing crossfall. Next, insert additional Fixed Lines using the Point and Grade option to define the required chainages, heights and grades. In the example, one fixed line passes through chainage 58 and height 32.5 with a grade of 8%, while another is defined using a grade of -3% to complete the vertical geometry. To connect these straight sections, insert Free Parabolas between the fixed lines and specify a curve length of 40 metres. These elements automatically form the vertical curves between the defined grades. The Part Editor also makes subsequent adjustments straightforward. For example, changing the height of a fixed line by 0.5 metres or modifying its grade from 8% to 7% automatically updates the connected vertical geometry without requiring new IP calculations.

The Element Method also makes it easier to accommodate changes to the horizontal alignment while maintaining the relationship between horizontal and vertical geometry. With Vertical Sync enabled when creating the super alignment, changes to horizontal chainage can automatically update the corresponding vertical geometry. For example, adjusting the horizontal offset by -5 metres shifts the alignment, while the vertical geometry updates its chainage to maintain its relationship with the end of the alignment. Further automation is possible through String References and Computers, which allow other string data to be directly referenced when defining horizontal and vertical geometry. This means that when connected strings change position, the super alignment can automatically recalculate to maintain the intended design relationships. By combining fixed, floating and free elements with these additional capabilities, the Element Method provides a more adaptable and efficient approach to super alignment design in 12d Model.

Watch the video here: