The Tipster: Creating Alignment Strings from Non 3D Models

Creating super alignment geometry from a non-3D source in 12d Model involves converting existing horizontal and vertical design information into a fully defined super alignment. Using the Intersection Point (IP) Method, information from drawings, long sections and coordinate tables can be used to construct horizontal geometry, including curves and transition spirals, and vertical geometry with parabolic curves.

To begin, extract the horizontal geometry information from the source drawing, including the easting and northing coordinates of tangent points and curve radii. Organise these details in a spreadsheet and save them as a CSV file for importing through File > Data Input > XYZ and Points File. Once imported, use the Two Points and Radius tool under CAD Arcs to draft the curves. Create a super alignment through Strings > Super Alignments > Create Super Alignment, then use the Snap to IP function in the Super Alignment Editor to position the horizontal Intersection Points along the drafted arcs. Assign the corresponding curve radii using the Move/Edit tools or the IP Editor. For the vertical geometry, identify the Vertical Intersection Points (VIPs) from the project’s long section, including their chainages, design heights, grades and curve lengths. Enter these values through the VIP Editor, use Change Grade to define the grades between VIPs, and specify the vertical curve lengths in the VIP properties.

Finally, verify the completed super alignment against the original design drawing by generating a long section plot using a suitable 12d Model template. Match the plotting scale to the source drawing and compare selected chainages and design values to identify any discrepancies. By preparing the source information in a spreadsheet and using the available drafting and editing tools, the IP Method provides an efficient approach to creating super alignment geometry from non-3D design information.

Watch the video here: