Supporting Auckland’s Housing Regeneration Through 12d Model and 12d Synergy

In this Customer Success Series, Kane Wilcox, Senior Civil Engineer and Design Manager for the Piritahi Alliance, shared how 12d Model and 12d Synergy are supporting one of New Zealand’s largest urban regeneration programmes. The project aims to replace approximately 7,000 older state houses, remediate land and upgrade infrastructure to make way for up to 33,000 new homes across Auckland. One of its key areas, the Ōrākei neighbourhood, involved complex brownfield conditions, including extensive basalt rock, ageing sewer and stormwater networks, existing underground services and the need to minimise disruption to residents during construction.

To manage these challenges, the design team used 12d Model to develop and coordinate 3D models for sewer, stormwater, roading and existing survey. The Water Network Editor supported network modelling, hydraulic analysis and automated long-section outputs, while other features helped with trench quantity calculations, service clash detection and the modelling of complex road intersections. The team also used 3D scanning to capture existing manholes and service chambers, enabling more accurate design and safer construction planning.

The alliance further integrated 12d Model with GIS, Revit, XP Storm and other platforms to improve information sharing and construction coordination. Drone surveys and augmented reality also supported site planning and design verification, while 12d Synergy streamlined document management, version control and project collaboration. Combined with innovations such as prefabricated manholes and improved rock excavation methods, these digital workflows have helped the Piritahi Alliance improve design efficiency, manage complex site conditions and support the delivery of new housing and infrastructure across Auckland.

Watch the full presentation here:

Simplicity in Complexity – Transport for NSW Digital Engineering Framework

Managing digital engineering requirements for infrastructure projects can involve large volumes of data, detailed classification systems, and extensive asset information. How can these requirements be managed more efficiently while maintaining consistency across a project?

In this Customer Success Series, Nile Brady, Director and Digital Consultant at Digitized, demonstrates how their team applies the Transport for NSW Digital Engineering Framework using 12d Model and Cloud D.

The presentation walks through practical techniques for simplifying complex BIM data requirements, including:

  • Streamlining data entry with Snippets: Using project attributes and dropdown lists to populate common information and reduce repetitive manual input.
  • Standardising BIM object information: Applying a custom library of BIM objects with predefined project, location, and asset attributes.
  • Automating attribute generation: Using an attribute emulator file to generate asset codes, labels, descriptions, and classification information.
  • Simplifying asset register preparation: Extracting model data into a structured CSV file that can be transferred directly into the Transport for NSW asset register.

By combining reusable templates, predefined attributes, and automated data processing, Digitized demonstrates how complex classification requirements can be managed more consistently, helping designers and engineers focus on their modelling tasks rather than manually entering extensive data.

Watch the full presentation to explore how these workflows can help simplify digital engineering and support more efficient infrastructure project delivery.

Lessons Learnt from a Self-taught 12d Designer

For new 12d Model users, the software can initially feel overwhelming. With its many tools, menus, buttons and layers of information, getting started can seem like a steep learning curve. For civil engineer Rule Falkstrom, who has more than five years of experience designing and supervising civil infrastructure projects across Queensland and New South Wales, learning 12d Model was largely a self-taught journey. His approach was simple: use every project as an opportunity to learn. Working across stormwater, pavements, driveways, car parks, sewer and water design allowed him to gradually build his knowledge while gaining practical experience. He also found that seeking advice from colleagues and other experienced users, even those who did not use 12d Model, helped him approach problems from different perspectives.

One of the most valuable resources in his learning journey was 12d Model’s range of free learning resources. Webinars and videos provided answers to most of his questions, covering topics such as earthworks, road design, stormwater, IFD data, super alignments and geometry. When a more specific question came up, the 12d Model online forum provided another valuable source of information, often revealing that someone else had already encountered and solved the same problem. For questions that could not be answered through these resources, contacting 12d Model support directly provided another avenue for assistance. The 12d Model manual was also useful for discovering small features and shortcuts that could significantly improve efficiency, such as using the middle mouse button for selection and learning more about snapping and drafting tools.

These techniques became particularly valuable on a recent detailed design project for a constrained service station site. The project involved stormwater and OSD design, pavement and earthworks, frontage works, and multiple stakeholders with different requirements. The site also had challenging level and gradient constraints involving the OSD outlet, fuel station bund, vehicle access, car parking, pedestrian paths and a future development stage. With so many interconnected elements, changing one level could affect multiple parts of the design. Pad grading tools proved especially useful because they made levels and grades easier to visualise and allowed different areas of the site to be adjusted efficiently. Contours, arrows and 3D views also provided useful visual cues, helping identify drainage paths, grade changes and potential issues that might not be immediately obvious in plan view.

The experience highlights an important lesson for both new and experienced 12d Model users: the software does not have to be mastered all at once. Understanding the tools available, learning 12d Model’s terminology, and using features such as pad grading, replication, snippets and templates can reduce repetitive work and make complex designs easier to manage. By combining practical project experience with webinars, videos, the online forum, the manual and support resources, users can gradually build confidence and allow the software to do more of the work for them. For self-taught users especially, consistent practice and making full use of available resources can turn an initially complex interface into a powerful part of the civil design workflow.

SMEC’s 6-Year 12d Model Macro Initiative: Innovation for Efficiency

What happens when a single improvement sparks years of innovation?

In this presentation, Josh Allison shares the remarkable journey of transforming one modified 12d Model macro into a powerful suite of more than 70 custom macros over six years at SMEC. What started as a small enhancement evolved into a solution that has been used over 153,000 times, delivering an estimated 26,000 hours of saved work and $1.86 million in productivity gains.

Whether you’re new to 12d Model macros or looking to expand automation across your team, this session offers practical insights into turning everyday tasks into lasting efficiency improvements.

Watch the full video to discover:

  • How one small macro evolved into a suite of 70+ automation tools.
  • Why a solid business case is essential for gaining support for innovation.
  • The importance of tracking measurable metrics to demonstrate success.
  • Practical ideas you can apply to introduce automation and improve workflows in your own organisation.